Adds new functions to, - and automates functions in a Volvo without making any changes to the Volvo!
How does it work
For more information: https://www.v-division.com/CFE-Plus-Capabilities
The CFE Plus (Unit) needs configuration to make sure the Unit knows what Volvo it is going to be used in and what and how functions should work.
This configuration is performed with the updater software (License included, directly available after purchase), installed and run on a PC with at least Windows 8.
The Unit needs to be connected to the PC with a Configuration and USB cable (Both supplied in the set).
Once you finalized the configuration and all functions are setup with the desired options; the CFE Plus can be connected to your Volvo.
The Unit connects to the Can-busses (Networks) in your Volvo and acts like an additional ECU (Computer).
To avoid possible mistakes in configuration, the Unit starts an "Initialization" after first Ignition (Made visible to the user by enabling the blue high-beam light in the dashboard while the initialization process is going on) and tries to match the made configuration with the actual Volvo.
If all matches the Initialization will finish and the Unit is ready for operation.
Now the CFE Plus is ready to perform its tasks.
For example; if you lock your Volvo with the key-fob, the CFE Plus will notice this on the Canbus and decide to close the windows for you.
For P2 (S60/V70/XC70/S80/XC90) up to and including model-year 2004, installation of the connection (See options on the right side of this page) harness is required.
All other supported models/model-years will allow a direct plug-and-play connection into the OBD Port (Onboard Diagnostic Port) of your Volvo.
For functions available, installation- and user manuals, please see documentation in the Support environment.
CFE Plus unit (Hardware unit, ECU)
Configuration cable (Cable to connect the CFE Plus to the USB cable)
USB cable (Cable to connect the configuration cable to a Windows PC)
Configuration Tool software license (Configuration software for making settings in the CFE Plus; directly available for download after purchase)
Firmware license (Firmware contains the 'logic'; directly available for download after purchase)
Manual Connection harness (Only required for MY2001 - 2004, optional for any other model-year, for example if you need a 2nd OBD2 Port)
Reverse camera set (For P3 only, full set, all required for installation included)
|Low and High speed Canbus||Product is connected to both low speed and high speed Canbus. MY2001-2004 require a manual connection set to create an additional OBD2 port, connected to the Volvo's wiring. (OBD2 port in MY2001-2004 not available for continuous use in those particular model-years, resulting in the CFE Plus not being operational as well in the ODB2 port!)|
|Open, in full development, new functions and bug fixes||Product is still in full active development. Expect new features and bug-fixes.|
|Reverse camera guide lines|
|Static (Can be enabled or disabled at install)||If the CFE Plus is used for controlling (reverse)-camera logic (P3 Volvo's only!) the optional camera offers static parking lines indicating object distance to the Volvo and direction the car is moving towards when reversing.|
|Sensus / Sensus Connect menu options|
|OEM camera function(s) in menu||If the CFE Plus is used for controlling (reverse)-camera logic (P3 Volvo's only!) the OEM camera menu in the Volvo will be enabled by the CFE Plus logic, enabling the driver to select the front-camera by a push on the button-location where normally the camera button would be. Pressing the "ok" button after that displays the menu. The (with OEM installation available) zoom-functions do not work in such case.|
CFE Plus (BE-512)
- Brands BElectronics
- Product Code: BE-512
- Stock status : In stock
- Ex Tax: €161.16